What is sidechain compression and how to use it in your productions

If you’ve spent some time in the world of music production, you will surely have heard of sidechain compression. It is an essential technique in genres such as electronic, pop or reggaeton, and one of the most powerful tools for controlling dynamics and creating space for the different elements of a mix.

In this article we explain what sidechain is, how it works and how you can easily apply it in your DAW to improve your mixes.

What is sidechain compression?

Sidechain compression is a technique that allows a sound (for example, a bass or a pad) to be automatically compressed whenever another sound (such as a kick drum) comes into action. In other words, you make a sound disappear or lower its volume whenever another one plays, to prevent them from overlapping in the frequency spectrum.

This is achieved using a compressor that receives an external signal (sidechain input) as a “trigger”. When that signal arrives, the compressor acts on another track reducing its volume temporarily.

What is sidechain used for?

Although its most common use is to make the kick and the bass not compete in the low frequencies (something fundamental in many electronic music styles), it can also be used creatively in many other situations:

  • To give “space” to the kick in a very dense mix.
  • To achieve a rhythmic pumping effect typical in house or EDM.
  • So that a vocal cuts above a pad without having to raise its volume.
  • To clean up the space between melodic instruments.

In the context of music production, learning to apply this technique is essential to achieve a modern and professional sound.

How to apply sidechain step by step to your music production

Below we explain how to set up sidechain in Ableton Live, although the process is very similar in DAWs like Logic, FL Studio or Cubase.

1. Add a compressor to the track you want to compress

For example, if you want your bass to ‘duck’ every time the kick plays, add a compressor on the bass track.

2.Enable sidechain mode

In the compressor panel, enable the “Sidechain” option and choose the kick track as the input source.

3.Adjust the compressor’s parameters

  • Threshold: determines the level at which the compressor starts to act.
  • Ratio: controls how much the volume is reduced.
  • Attack and Release: control the speed of the compression’s attack and release times.
    • A short attack will make the effect noticeable immediately.
    • A long release can create that characteristic ‘pumping’ effect.
Screenshot of compressor with sidechain enabled in Ableton Live for music production.

Recommended plugins for sidechain

In addition to your DAW’s native compressor, there are plugins specifically designed for sidechaining that you may find easier and more intuitive:Kickstart (Nicky Romero)ShaperBox (Cableguys)LFO Tool (Xfer Records)Pro-C 2 (FabFilter)These plugins allow for more precise control of the effect and can even be applied without an input signal, using customisable waveforms.

Learn sidechaining in our music production courses

At EUMES we teach how to master sidechain compression both from a technical and a creative perspective. Whether you study the Diploma in Advanced Music and Sound, our intensive Ableton Expert Music Producer course, or one of the specialised production or mixing courses, you will learn to apply this and other key techniques to your own productions.

🎧 Want to take your mixes to the next level?
Mastering sidechaining is only the beginning. Discover everything you can learn with us:

Sidechain compression is much more than a pumping effect. It is a mixing and sound-design tool that, when used well, can transform the clarity, energy and professionalism of your tracks.

Final tip: Don’t use it just because it “sounds good”, but because it adds something to your song. Always listen carefully and remember that attack and release times will drastically change the feel of the effect.

{ "@context": "https://schema.org", "@type": "BlogPosting", "mainEntityOfPage": { "@type": "WebPage", "@id": "https://eumes.cat/es/sidechain-que-es-y-para-que-sirve/" }, "headline": "What is sidechain compression and how to use it in your productions", "description": "Learn what sidechain compression is and how to use it in your music productions. An essential technique in genres such as EDM, pop or reggaeton to achieve cleaner, more professional mixes.", "image": "https://eumes.cat/wp-content/uploads/2021/08/sidechian-2.png", "author": { "@type": "Organization", "name": "EUMES", "url": "https://eumes.cat/es" }, "publisher": { "@type": "Organization", "name": "EUMES", "logo": { "@type": "ImageObject", "url": "https://eumes.cat/wp-content/uploads/2024/07/logo_es-1-1.png" } }, "datePublished": "2025-06-25", "dateModified": "2025-06-25" } ]]>

Related Articles

Would you like more information?

Write to us and let’s talk!